| 1.00 | Apply Procedures to complete AWS SENSE Module 2 - Safety and Health of Welders | 10% | C3 Apply Procedural |
| 1.01 | Demonstrate proper use and inspection of personal protection equipment (PPE). | 2% | - |
| 1.02 | Demonstrate proper safe operation practices in the work area. | 2% | - |
| 1.03 | Demonstrate proper use and inspection of ventilation equipment. | 1% | - |
| 1.04 | Demonstrate proper Hot Zone operation. | 1% | - |
| 1.05 | Demonstrate proper work actions for working in confined spaces. | 1% | - |
| 1.06 | Demonstrate proper use of precautionary labeling and SDS information. | 2% | - |
| 1.07 | Demonstrate proper inspection and operation of equipment used for each welding and thermal cutting process. | 1% | - |
| 2.00 | Apply Procedures to complete AWS SENSE Module 8 - Thermal Cutting Process - Safety | 5% | C3 Apply Procedural |
| 2.01 | Perform safety inspections of manual and mechanized OFC equipment and accessories. | 3% | - |
| 2.02 | Perform safety inspections of manual PAC equipment and accessories. | 1% | - |
| 2.03 | Perform safety inspections of manual CAC-A equipment and accessories. | 1% | - |
| 3.00 | Apply Procedures to complete AWS SENSE Module 8 - Thermal Cutting Process - Unit 1: Manual Oxyfuel Cutting and Unit 2: Mechanized Oxyfuel Gas Cutting | 19% | C3 Apply Procedural |
| 3.01 | Make minor external repairs to manual and mechanized OFC equipment and accessories. | 3% | - |
| 3.02 | Set up for manual and mechanized OFC operations on carbon steel. | 6% | - |
| 3.03 | Operate manual and mechanized OFC equipment on carbon steel. | 5% | - |
| 3.04 | Perform straight and shape, square and bevel edge cutting operations in flat position, on carbon steel. | 5% | - |
| 4.00 | Apply Procedures to complete AWS SENSE Module 8 -Thermal Cutting Process -Unit 3 Manual Plasma Arc Cutting | 9% | C3 Apply Procedural |
| 4.01 | Make minor external repairs to manual PAC equipment and accessories. | 2% | - |
| 4.02 | Sets up for manual PAC operations on carbon steel, austenitic stainless steel, and aluminum. | 2% | - |
| 4.03 | Operate manual PAC equipment on carbon steel, austenitic stainless steel, and aluminum. | 2% | - |
| 4.04 | Perform straight and shape, square edge, cutting operations, in the flat position, on carbon steel, austenitic stainless steel, and aluminum. | 3% | - |
| 5.00 | Apply Procedures to complete AWS SENSE Module 8 -Thermal Cutting Process -Unit 4 Manual Air Carbon Arc Cutting | 5% | C3 Apply Procedural |
| 5.01 | Make minor external repairs to manual CAC-A equipment and accessories. | 1% | - |
| 5.02 | Set up for manual CAC-A scarfing and gouging operations on carbon steel. | 1% | - |
| 5.03 | Operate manual CAC-A equipment on carbon steel. | 1% | - |
| 5.04 | Perform scarfing and gouging operations to remove base and weld metal, in the flat and horizontal positions, on carbon steel. | 2% | - |
| 6.00 | Apply Procedures from AWS SENSE Module 4 - Shielded Metal Arc Welding (SMAW) Safety | 5% | C3 Apply Procedural |
| 6.01 | Perform safety inspections of SMAW equipment and accessories. | 2% | - |
| 6.02 | Demonstrate safe working practices as described in American National Standard Z49.1. | 3% | - |
| 7.00 | Apply Procedures from AWS SENSE Module 4 - Shielded Metal Arc Welding (SMAW) Base Metal Prep and Welding Positions | 12% | C3 Apply Procedural |
| 7.01 | Operate SMAW equipment on carbon steel. | 4% | - |
| 7.02 | Prepares base metal for welds | 4% | - |
| 7.03 | Identifies and performs various welding positions | 4% | - |
| 8.00 | Apply Procedures from AWS SENSE Module 4 - Shielded Metal Arc Welding (SMAW) Equipment Setup | 17% | C3 Apply Procedural |
| 8.01 | Make minor external repairs to SMAW equipment and accessories. | 5% | - |
| 8.02 | Set up for SMAW operations on carbon steel. | 12% | - |
| 9.00 | Apply Procedures from AWS SENSE Module 4 - Shielded Metal Arc Welding (SMAW) Fillet Weld | 18% | C3 Apply Procedural |
| 9.01 | Make fillet welds in all positions on carbon steel. | 9% | - |
| 9.02 | Perform welds using E6010, E6011, or E7018 electrodes | 9% | - |
